PBY Catalina - PNP (Plug and Play) Brushless Powered (DY8943) -

Current Browse Location: Home : All Items : Model Electric Planes >

The Dynam PBY Catalina twin engined (PNP) model seaplane is one of the latest releases from Dynam.

 

This model is supplied as PNP (Plug and Play) which means that the plane is provided complete but excludes Transmitter, Receiver, Flight Battery and Charger. 
 

*********************************­**************
Designed for water take offs and landing
*********************************­**************

The PBY Catalina seaplane is constructed from strong EPO foam and it has a scale look, complete with decals. The plane has dual pre installed brushless motors with three bladed props. All servo's and the ESC's are also pre installed. Expect flight time to be 8 to 10 minutes per charge.

Specifications

Length: 940mm
Wing Span: 1470mm
Flying weight: 1200g
Wing loading: 44g/dm 2

The PNP kit includes the following:

- Plane including decals (requires assembly)
- Dynam 4 x 9 gram servo's (for aileron, elevator and rudder controls)
- Dynam 30 amp Brushless Electronic Speed Controller x 2
- Dynam KV1100 Brushless motors and props x 2
 
Note #1: some assembly is required.

Note #2: to complete this model and get you up and flying you will need to provide (not included):

* Radio Control Transmitter/Receiver (5 channel)
* Flight Battery 11.1 volt 3 cell 2200mah 20C
* Lithium polymer battery charger

The kit includes pretty much everything you need to get flying including:

The plane is constructed from EPO foam and with the brushless motor has plenty of power.

To get yourself up and flying a small amount of assembly is required which will probably take you around 1 to 2 hours.

The plane has the motor's, ESC's and servo's pre-installed.